BEFOREYOU BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H620 Headset.
Volume
Buttons
motorola
H620
Ear
Speaker
Call
Button
Power
Switch
Quick Start Guide
Indicator Light/
Microphone
(on side)
START BLUETOOTH
CHARGE
1
2
Your Headset's Battery
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
Verify slide switch is in the off position (toward
the charging port).
1
2
M
Press
(Menu) > Settings > Connection >
1
Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Plug the Motorola charger into the end of the
headset.
2
3
4
5
The indicator light turns red or yellow when the
battery is charging. It may take up to 1 minute
for the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns green.
Disconnect the charger.
3
Press Select to turn on the Bluetooth
feature.The Bluetooth feature remains on
until you turn the feature off.
Note: Headset is not functional while charging.
Note:This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
USING YOUR H620
TEST AND USE
4
See
Features and
Your phone and headset are now paired and
ready to make and receive calls.
Functions Guide
on the reverse side
for information on
using your H620
To make a call:
Place the headset over your ear.
1
2
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
Note: If desired, your headset can be restored to
original factory settings.This action will erase all pairing
information stored in your headset.Thus, you will need
to pair your phone and headset again (see step 3).
Note: To restore your headset to original factory
settings, press and hold both Volume buttons and the
Call button at the same time for 10 seconds.
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds,
then turn headset back on. Wait for the indicator
light to become steadily lit in blue, indicating
the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
TURNING HEADSET
ON AND OFF
Features and
To turn your headset on, slide the switch
toward the indicator light.The indicator light
flashes blue three times, then flashes in
blue and purple (if connected with a device)
or is steadily blue (if ready to be paired).
Functions Guide
H620
Bluetooth®
Handsfree Headphones
To turn your headset off, slide the switch
toward the charging plug (the orange color
under the switch is displayed).The indicator
light flashes three times then turns off.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H620.
Indicator Light
(on side)
Power
Switch
WEARINGTHE
HEADSET
EARBUDS AND YOUR
HEADSET
Your H620 headset is supplied with multiple
earbuds.The earbud is fitted onto the end of
your headset’s earpiece speaker, and placed
onto your ear when using your headset.
To wear your headset, flex the earhook and
loop it over your ear as shown.
Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied earbuds with your headset.
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
|